cpqtag命令说明
版主: xyevolve
版面规则
1. 本版是定位于惠普笔记本电脑的技术讨论区。
2. 本版鼓励发帖共同讨论技术问题,不鼓励站内信件私下交流,独知知不如众知知。
3. 本版允许转贴或引用他人的作品,但必须声明原作者信息。
4. 本版禁止发表出售、求购、或其他非技术讨论等帖子。
5. 本版宁缺毋滥,严禁灌水,包括但不限于任何与所讨论主题无关的回复,无意义字符,直接复制其他回复等。
6. 本站附件仅限个人使用,请在下载后24小时内删除,本站不对其造成的结果负任何责任,请自行评估风险。
1. 本版是定位于惠普笔记本电脑的技术讨论区。
2. 本版鼓励发帖共同讨论技术问题,不鼓励站内信件私下交流,独知知不如众知知。
3. 本版允许转贴或引用他人的作品,但必须声明原作者信息。
4. 本版禁止发表出售、求购、或其他非技术讨论等帖子。
5. 本版宁缺毋滥,严禁灌水,包括但不限于任何与所讨论主题无关的回复,无意义字符,直接复制其他回复等。
6. 本站附件仅限个人使用,请在下载后24小时内删除,本站不对其造成的结果负任何责任,请自行评估风险。
-
- 注册用户
- 帖子: 15
- 注册时间: 2011年 11月 25日 14:45 星期五
- 来自: 重庆市江北区
cpqtag命令说明
BIOS刷新后需要写入序号,SKU,SN等信息,对于新手来说,在论坛很容易就能找到高手们分享CPQTAG的工具,但如何操作,却比较少提及。本人在得到版主的帮助下,将此经验分享给和我一样的新人。
写入型号:cpqtag write model "EliteBook 8560W"
写入product number:cpqtag write SKU "XXXX"
写入serial number:cpqtag write serial "XXXX"
写入system board CT:cpqtag write sysbrdct "XXX"
感谢版主的帮忙。
其它指令完整说明:
Usage: CPQTAG.EXE [CMD] [TYPE] {string}
CMD = READ/WRITE/CHECK/MODIFY/GENERATE (REQUIRED)
TYPE = SERIAL/ASSET/MODEL/ID/SKU/MBSN/TPM/SLP/FASTLOOK/DIGIPANELSUPPORT (REQUIRED)
VPRO/WWAN/DEFAULTS/FLASHID/OWNER/CONFIGID/OSTYPE/
ATP/ME/COMPUTRACE/FNKEYSWITCH/PRODLINE/SYSBRDCT
string = Data to write (optional for READ command)
CPQTAG read serial
CPQTAG write model M700
CPQTAG modify asset 6622HVS3P025
CPQTAG read TPM
CPQTAG write TPM [ON,OFF]
CPQTAG read SLP
CPQTAG write SLP [ON,OFF]
CPQTAG read VPRO [VPRO_STATE,DESCRIPTOR_STATE,MGMT_ENGINE_STATE,OVERRIDE_STATE]
CPQTAG write VPRO [ON,OFF,LOCK,RESET]
CPQTAG write ME [ON,OFF]
CPQTAG write ME [LOCK | UNCOMMIT]
CPQTAG read ME [STATUS]
CPQTAG reboot [VPRO | ME]
CPQTAG read WWAN
CPQTAG write WWAN [ANTENNA] [NOANTENNA]
CPQTAG write WWAN [GPS] [NOGPS]
CPQTAG write WWAN [OP0,OP1,...OP7]
CPQTAG write WWAN CLEAR
CPQTAG write DEFAULTS
CPQTAG read FLASHID (TT 1.0 systems only)
CPQTAG write OWNER Hewlett-Pacakard Company
CPQTAG write RESETKEYS ON
CPQTAG write configid
CPQTAG write PTDEFAULTS
CPQTAG write MPM (Manufacturing Program Mode, formerly - FACTORYMODE
CPQTAG read BraidWood
CPQTAG write BraidWood [Default, Erase, Destroy, Create]
CPQTAG write OsType
CPQTAG write WWANWMI
CPQTAG write VT
CPQTAG write SOFTSTYLUS [SUPPORTED, NOTSUPPORTED]
CPQTAG write ATP OFF
CPQTAG read ATP
CPQTAG write COMPUTRACE [ENABLE | DISABLE] (Write once/locked)
CPQTAG write RESETWSD
CPQTAG read FASTLOOK
CPQTAG write FASTLOOK [ON,OFF]
CPQTAG read DIGIPANELSUPPORT
CPQTAG write DIGIPANELSUPPORT [ON,OFF]
CPQTAG write FNKEYSWITCH [ENABLE | DISABLE]
CPQTAG write ESTAR [ON,OFF]
CPQTAG read OOCLVDS
CPQTAG write OOCLVDS [DEFALUTTABLE|NULL|panel.txt]
CPQTAG read | write PRODLINE
CPQTAG read | write SYSBRDCT
CPQTAG read | write FCM (FactoryControlMode) [0 - 7]
You must reboot the system with 'CPQTAG reboot VPRO'
after locking VPro configuration with one of:
'CPQTAG write VPRO [ON,OFF,LOCK,RESET]
写入型号:cpqtag write model "EliteBook 8560W"
写入product number:cpqtag write SKU "XXXX"
写入serial number:cpqtag write serial "XXXX"
写入system board CT:cpqtag write sysbrdct "XXX"
感谢版主的帮忙。
其它指令完整说明:
Usage: CPQTAG.EXE [CMD] [TYPE] {string}
CMD = READ/WRITE/CHECK/MODIFY/GENERATE (REQUIRED)
TYPE = SERIAL/ASSET/MODEL/ID/SKU/MBSN/TPM/SLP/FASTLOOK/DIGIPANELSUPPORT (REQUIRED)
VPRO/WWAN/DEFAULTS/FLASHID/OWNER/CONFIGID/OSTYPE/
ATP/ME/COMPUTRACE/FNKEYSWITCH/PRODLINE/SYSBRDCT
string = Data to write (optional for READ command)
CPQTAG read serial
CPQTAG write model M700
CPQTAG modify asset 6622HVS3P025
CPQTAG read TPM
CPQTAG write TPM [ON,OFF]
CPQTAG read SLP
CPQTAG write SLP [ON,OFF]
CPQTAG read VPRO [VPRO_STATE,DESCRIPTOR_STATE,MGMT_ENGINE_STATE,OVERRIDE_STATE]
CPQTAG write VPRO [ON,OFF,LOCK,RESET]
CPQTAG write ME [ON,OFF]
CPQTAG write ME [LOCK | UNCOMMIT]
CPQTAG read ME [STATUS]
CPQTAG reboot [VPRO | ME]
CPQTAG read WWAN
CPQTAG write WWAN [ANTENNA] [NOANTENNA]
CPQTAG write WWAN [GPS] [NOGPS]
CPQTAG write WWAN [OP0,OP1,...OP7]
CPQTAG write WWAN CLEAR
CPQTAG write DEFAULTS
CPQTAG read FLASHID (TT 1.0 systems only)
CPQTAG write OWNER Hewlett-Pacakard Company
CPQTAG write RESETKEYS ON
CPQTAG write configid
CPQTAG write PTDEFAULTS
CPQTAG write MPM (Manufacturing Program Mode, formerly - FACTORYMODE
CPQTAG read BraidWood
CPQTAG write BraidWood [Default, Erase, Destroy, Create]
CPQTAG write OsType
CPQTAG write WWANWMI
CPQTAG write VT
CPQTAG write SOFTSTYLUS [SUPPORTED, NOTSUPPORTED]
CPQTAG write ATP OFF
CPQTAG read ATP
CPQTAG write COMPUTRACE [ENABLE | DISABLE] (Write once/locked)
CPQTAG write RESETWSD
CPQTAG read FASTLOOK
CPQTAG write FASTLOOK [ON,OFF]
CPQTAG read DIGIPANELSUPPORT
CPQTAG write DIGIPANELSUPPORT [ON,OFF]
CPQTAG write FNKEYSWITCH [ENABLE | DISABLE]
CPQTAG write ESTAR [ON,OFF]
CPQTAG read OOCLVDS
CPQTAG write OOCLVDS [DEFALUTTABLE|NULL|panel.txt]
CPQTAG read | write PRODLINE
CPQTAG read | write SYSBRDCT
CPQTAG read | write FCM (FactoryControlMode) [0 - 7]
You must reboot the system with 'CPQTAG reboot VPRO'
after locking VPro configuration with one of:
'CPQTAG write VPRO [ON,OFF,LOCK,RESET]
-
- 注册用户
- 帖子: 400
- 注册时间: 2011年 3月 9日 02:46 星期三
-
- 注册用户
- 帖子: 3
- 注册时间: 2013年 1月 16日 15:24 星期三
Re: cpqtag命令说明
我的4720S 一直显示 machine is not in committed state 试过很多软件了,依然解决不了,是程序运行不起来,
-
- 注册用户
- 帖子: 3
- 注册时间: 2013年 9月 27日 22:24 星期五
Re: cpqtag命令说明
CPQTag和NBDMIFit工具的区别在哪里?前者是后者的一个子工具吗?
- MUDBOY
- 创始人
- 帖子: 3882
- 注册时间: 2010年 12月 28日 21:17 星期二
Re: cpqtag命令说明
建议用NBDMIFit工具,dos下按提示操作就行
提倡分享之精神, 技术问题请在相关版面直接发帖, 站内短信恕不答复.
I don't answer private messages on topics of public interest, because it defeats the whole purpose of a message board.
I don't answer private messages on topics of public interest, because it defeats the whole purpose of a message board.