CP3525 Series and CM3530 MFP Paper jams
发表于 ： 2014年 11月 18日 10:23 星期二
A common misconception is that a paper jam involves a crumpled or damaged sheet of paper that is literally jammed inside the device. Crumpled paper is one type of jam. Jams that do not damage the paper are timing jams.
Types of jams
• Delay jam: Paper does not reach a sensor in an expected amount of time
• Stationary jam: Paper stays in a sensor for longer than expected
• Wrapping jam: Fuser detects leading edge of paper, but not the trailing edge
• Residual media jam: Paper is detected in a sensor at power on or door close
• Door open jam: A door is opened during a paper feed operation
Types of jams
• Delay jam: Paper does not reach a sensor in an expected amount of time
• Stationary jam: Paper stays in a sensor for longer than expected
• Wrapping jam: Fuser detects leading edge of paper, but not the trailing edge
• Residual media jam: Paper is detected in a sensor at power on or door close
• Door open jam: A door is opened during a paper feed operation