HPFOCUS

重置ProLiant 1xx系列服务器LO100密码（Reset password of Lights-Out 100）

Lights-Out 100 是配置在 ProLiant 1xx 系列服务器上的，它的固件firmware和硬件hardware都和iLO 或者 iLO2不一样

Try the following to recover your Lights-Out 100 user credentials (password only):

1) Create a DOS bootable disk (floppy or USB key)
2) Download the IPMItool from this link:
http://www.intel.com/design/servers/ipmi/ipmi_tool.htm
或者直接下载附件如下， 3) Copy the IPMItool.exe to the bootable disk
4) Boot the server using the bootable disk
5) Run "ipmitool.exe 20 18 47 03 02 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00"
6) Now your password should reset back to "admin"


--------------------------------------------------------------------------------
Re-enable admin account use the command.

5) Run "ipmitool.exe 20 18 47 03 02 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00"

Flag "01" ( fith pair of symbols) enable admin account

官网技术支持文档

http://h20000.www2.hp.com/bizsupport/Te ... R1002_USEN

HP ProLiant DL and ML Server Series - HP Lights-Out 100 Admin Account Locked

ISSUE:

Admin account locked out by user with 2.14 firmware.

SOLUTION:

lights-out 100 does have an option to disable to Admin account in the web interface for the version 2.14 firmware. If that box was accidently checked, the admin account will not work.
An attempt was made to upgrade and downgrade the firmware, and CMOS was cleared, but the account was still locked.
To enable the admin account and resolve this issue, perform the following steps:

Create a DOS bootable disk (floppy or USB key)
Download the IPMItool from http://www.intel.com/design/servers/ipmi/ipmi_tool.htm ( Click here to download the IPMItool http://www.intel.com/design/servers/ipmi/ipmi_tool.htm )
Copy the IPMItool.exe to the bootable disk
Boot the server using the bootable disk
Run "ipmitool.exe 20 18 47 03 01 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00"
The following information applies to the hex code for the ipmitool:
"20 18" is the SetFN/LUN numbers (the ILIM address and type).
"47 03" is the command string.
"02" means "set password"
"01" means "enable user"
The ASCII string for the password "admin" is "61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00"

Now the admin account should be enabled.

请问楼主您是HP的人么？L2？还是？怎么懂怎么多东西？