分页: 1 / 1
OA Update
发表于 : 2013年 11月 19日 13:34 星期二
由 SYSTEM
Mark 写了:Can I update an OA directly from 3.11 to 3.71, or do I need to apply any intermediate versions?
If I do need to apply intermediate versions, any recommendations on what versions need to be applied?
All the servers will be shutdown when this is being done and the chassis does have two Cisco 3020 switches along with 2 Brocade 4GB switches.
Re: OA Update
发表于 : 2013年 11月 19日 13:34 星期二
由 SYSTEM
Stefan 写了:A direct upgrade should work just fine in my experience.
Unless you have another need to shut down the servers while the OA upgrade is ongoing, you do not need to do it. The OA upgrade is non-disruptive to the servers.
Of cause, you cannot power on/off servers etc. while it is happening. However, the running servers will keep running, without network disruptions or anything like that.
Re: OA Update
发表于 : 2013年 11月 19日 13:35 星期二
由 SYSTEM
========Posted by Lawrance=========
I agree that a direct upgrade of the OA should be fine.
Just be a little careful if you have Integrity blades in the chassis, and if you have SIM server is ver 6.2. They will need to update SIM to support the new OA version.