分页: 1 / 1
A0R66A HP ProLiant DL980 NC375i SPI Board
发表于 : 2013年 1月 5日 16:46 星期六
由 SYSTEM
Ed 写了:I know it is now required to add A0R66A HP ProLiant DL980 NC375i SPI Board card manually, previously is bundled with the configuration.
Is this the one gig dual port network card that sits on the motherboard ?
Re: A0R66A HP ProLiant DL980 NC375i SPI Board
发表于 : 2013年 1月 5日 16:48 星期六
由 SYSTEM
Keith 写了:The SPI is the 'System Peripheral Interface'.
It is the core I/O board for the DL580/DL980 and contains the integrated network interfaces, embedded Smart Array disk controller, serial, USB, video, keyboard, mouse, etc. connections.
So, the SPI does include the quad network interfaces, but it also contains several other items.
And now there are two SPI options for the DL980.
The difference is the standard / integrated networking.
One has the NC375i (Qlogic/NetXen - which was standard on all earlier DL980 systems), and the other (the new option) has 331i (Broadcom).
See also below.
1.png
2.png
Re: A0R66A HP ProLiant DL980 NC375i SPI Board
发表于 : 2013年 1月 5日 16:49 星期六
由 SYSTEM
Re: A0R66A HP ProLiant DL980 NC375i SPI Board
发表于 : 2013年 1月 7日 14:56 星期一
由 MUDBOY
So there are two types of DL980 board now.