I have a case that has a 3GB SAS interconnect module connected to an MDS600.
Inside the OA we can get to the Virtual SAS Manager software via the management link.
They have assigned an IP address to the switch as well through the software.
However, in the EBIPA settings it is not enabled and is showing current address of 169.x.x.x.
Any idea on how to get it to report properly to the OA because they are trying to manage the switch with SIM and when we discover the OA it brings in the 169.x.x.x address.
In SIM when we discover the proper ip address it shows up as expected but is not associated with the enclosure in SIM as the OA thinks it is at 169.x.x.x for an ip address.
Any thoughts/suggestions are appreciated.
3GB SAS Switch
版主： xyevolve
版面规则
1. 本版是定位于惠普服务器的技术讨论区。
2. 本版鼓励发帖共同讨论技术问题，不鼓励站内信件私下交流，独知知不如众知知。
3. 本版允许转贴或引用他人的作品，但必须声明原作者信息。
4. 本版禁止发表出售、求购、或其他非技术讨论等帖子。
5. 本版禁止灌水，包括但不限于任何与所讨论主题无关的回复，无意义字符，直接复制其他回复等。
6. 本站附件禁止用于商业目的，请在下载后24小时内删除，本站不对其造成的结果负任何责任。
1. 本版是定位于惠普服务器的技术讨论区。
2. 本版鼓励发帖共同讨论技术问题，不鼓励站内信件私下交流，独知知不如众知知。
3. 本版允许转贴或引用他人的作品，但必须声明原作者信息。
4. 本版禁止发表出售、求购、或其他非技术讨论等帖子。
5. 本版禁止灌水，包括但不限于任何与所讨论主题无关的回复，无意义字符，直接复制其他回复等。
6. 本站附件禁止用于商业目的，请在下载后24小时内删除，本站不对其造成的结果负任何责任。
-
HEUNG
- 荣誉版主
- 帖子： 229
- 注册时间： 2011年 1月 26日 23:31 星期三
Re: 3GB SAS Switch
This is addressed in firmware 2.2.17 for the switch and allows SIM to see the correct address.
However be aware that with the updated firmware the SAS manager wont launch from the OA console and you will need to enter the IP address manually instead of using the hyperlink if you are implementing VLAN on the OA
http://h20000.www2.hp.com/bizsupport/Te ... Id=3709945
However be aware that with the updated firmware the SAS manager wont launch from the OA console and you will need to enter the IP address manually instead of using the hyperlink if you are implementing VLAN on the OA
http://h20000.www2.hp.com/bizsupport/Te ... Id=3709945
Version: 2.2.17.0 (20 Jun 2011)
Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
________________________________________
Enhancements/New Features:
The HP 3Gb SAS Switch will now publish external IP addresses to Onboard Administrator versions 3.20 or later instead of the internal IP address.