悲剧,买了SSD发现8560p的硬盘接口是SATAII的
发表于 : 2012年 7月 14日 11:45 星期六
HP真是太搞了, 主板上2个SATAIII口都不用,一定要用SATAII。
Version: F.22 (22 Dec 2011)
Fixes
- Fixes an issue where the BIOS setup (F10) does not display the Smart Card Power Options after the system is restarted. - Fixes an issue where the system restart (reboot) is slow after the modem is disabled in the BIOS setup (F10).
Enhancements
- Provides support for an additional Wirelesss WAN module. - Provides support for the SATA 3.0 SSD hard drive.
==========MUDBOY 写了:试试升级到最新的BIOS试试?
目前最新的是F.26,似乎从F.22起就提供SATA 3的固态硬盘支持了。
Version: F.22 (22 Dec 2011)
Fixes
- Fixes an issue where the BIOS setup (F10) does not display the Smart Card Power Options after the system is restarted. - Fixes an issue where the system restart (reboot) is slow after the modem is disabled in the BIOS setup (F10).
Enhancements
- Provides support for an additional Wirelesss WAN module. - Provides support for the SATA 3.0 SSD hard drive.
2560p升9月26日bios,成sataⅢ,你也看看有没有新bios?webdev 写了:HP真是太搞了, 主板上2个SATAIII口都不用,一定要用SATAII。